No Users Snmpv3 Authentication; Users Snmpv3 Encryption; No Users Snmpv3 Encryption; Show Loginsession - D-Link DES-3226L Cli Command Reference

no users snmpv3 authentication

This command sets the authentication protocol to be used for the specified user to none. The
<username> is the user name for which the specified authentication protocol is used.
Format
Mode

users snmpv3 encryption

This command specifies the encryption protocol used for the specified user. The valid encryption
protocols are
If you select
to 64 characters long. If you select the
the key. When you use the
password, so it must be a minimum of eight characters. If you select
key.
The <username> value is the login user name associated with the specified encryption.
Default
Format
Mode

no users snmpv3 encryption

This command sets the encryption protocol to none. The <username> is the login user name for which
the specified encryption protocol will be used.
Format
Mode

show loginsession

This command displays current telnet and serial port connections to the switch.
Format
Mode
ID
User Name
Connection From
Idle Time
Session Time
users snmpv3 authentication <username>
Global Config
or
des none.
, you can specify the required key on the command line. The encryption key must be 8
des
des
protocol, the login password is also used as the snmpv3 encryption
des
no encryption
users snmpv3 encryption <username> {none | des[key]}
Global Config
no users snmpv3 encryption <username>
Global Config
show loginsession
Privileged EXEC
Login Session ID
The name the user will use to login using the serial port or Telnet.
IP address of the Telnet client machine or EIA-232 for the serial port
connection.
Time this session has been idle.
Total time this session has been connected.
Access and Security Commands
protocol but do not provide a key, the user is prompted for
none
, you do not need to provide a
85