Mercedes-Benz E-Class Sedan Operator's Manual page 90

88
Seats and stowing
Adjusting the gap between the head
restraint and the back of your head:
To move forward: pull the head restraint
#
forward.
To move back: press release knob
#
push the head restraint back.
Adjusting the rear seat head restraints
To raise: pull the head restraint up.
#
To lower: press release knob
#
tion of the arrow and push the head restraint
down.
The head restraints can only be removed on
1 and
vehicles with folding rear seat backrests.
Release the rear seat backrest and fold it
#
slightly forwards.
To remove: pull the head restraint up to the
#
stop.
Push release knob
#
arrow and pull out the head restraint.
To install: insert the head restraint so that
#
the notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until it
#
engages.
Fold the rear seat backrest back until it
#
engages.
Configuring seat settings
1 in the direc‐
Multimedia system:
#
Adjusting the backrest side bolsters
#
#
Adjusting the seat contour in the lumbar
region of the seat backrest
1 in the direction of the
#
#
#
Adjusting the dynamic multicontour seat
Multimedia system:
The dynamic lateral cornering support can be
adjusted using this function.
#
a
, .
Select or
Select .
Select the setting.
Select .
Adjust the air cushion.
Save the settings with the memory function
( page 94).
→
a
, .
Select or
.
.