Mercedes-Benz E-Class Sedan Operator's Manual page 53

If necessary, move head restraint
#
upwards ( page 88).
→
Fold up cover 2 of Top Tether anchorage
#
3.
Install the LATCH-type (ISOFIX) child restraint
#
system with Top Tether. Always comply with
the child restraint system manufacturer's
installation instructions when doing so.
Route Top Tether belt
#
restraint 1
bars.
Hook Top Tether hook
#
5 without twisting into Top Tether anchor‐
age 3.
1
Tension Top Tether belt 5. Always comply
#
with the child restraint system manufactur‐
er's installation instructions when doing so.
Fold down cover
#
3.
If necessary, move head restraint
#
wards ( page 88). Make sure that you do
→
5 under head
between the two head restraint
4 of Top Tether belt
2 of Top Tether anchorage
1 down‐
Occupant safety
not interfere with the correct routing of Top
Tether belt 5.
Child restraint systems on the front
passenger seat
Notes on child restraint systems on the front
passenger seat
Accident statistics show that children secured in
the rear seats are safer than children secured in
front seats. For this reason, Mercedes-Benz
strongly advises that you install a child restraint
system on a rear seat.
If it is absolutely necessary to install a child
restraint system on the front passenger seat,
always observe the information on the automatic
front passenger air bag shutoff (
By doing this, you can avoid risks caused by:
A child restraint system that is not detected
R
by the automatic front passenger air bag
shutoff.
The unintentionally deactivated front
R
passenger air bag.
51
page 39).
→