Mercedes-Benz E-Class Sedan Operator's Manual page 367

Position jack 2 at jack support point 1.
#
Turn ratchet wrench 3 clockwise until jack
#
2 sits completely on jack support point
and the base of the jack lies evenly on the
ground.
Continue to turn ratchet wrench
#
tire is raised a maximum of 1.2 in (3 cm) off
the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements
The vehicle is raised (
R
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
1
3 until the
page 365).
→
page 363).
→
#
#
#
#
Mounting a new wheel
Requirements
R
Wheels and tires 365
Screw centering pin 1 instead of the wheel
bolt into the thread.
Unscrew the remaining wheel bolts fully.
Remove the wheel.
Mount the new wheel ( page 365).
→
The wheel is removed ( page 365).
→