Mercedes-Benz E-Class Sedan Operator's Manual page 110

108 Seats and stowing
Only use dry and damage-free connect‐
#
ing cables.
When the ignition is switched off,
#
ensure that the 115 V socket is dry.
If the 115 V socket is damaged or gets
#
pulled out of the paneling, immediately
have the socket checked or replaced at
a qualified specialized workshop.
Never plug the connecting cable into a
#
115 V socket that is damaged or has
been pulled out of the trim.
& DANGER Risk of fatal injury due to incor‐
rect handling of the socket
You could receive an electric shock:
if you reach into the socket.
R
if you insert unsuitable devices or objects
R
into the socket.
Only connect suitable devices to the
#
socket.
Requirements
Only connect devices with a suitable plug
R
which conforms to the standards specific to
the country you are in.
Only connect devices up to a maximum of
R
150 watts.
Do not use multiple socket outlets.
R
Open flap 3.
#
Insert the plug of the device into 115 V
#
socket 1.
When the on-board electrical system voltage
is sufficient, indicator lamp
Using the 12 V socket in the trunk
Prerequisite
Only connect devices up to a maximum of 180
Watt (15 A)
2 lights up.