Display messages
Possible causes/consequences and
* Blind Spot Assist is temporarily unavailable.
The system limits have been reached (
Drive on.
#
When the causes no longer apply, the system will be available again.
or
If the display message does not disappear, stop the vehicle while paying attention to road and traffic conditions
#
and restart the engine.
If necessary, clean the rear bumper. If the bumper is extremely dirty, the sensors in the bumper may be mal‐
#
functioning.
* Active Blind Spot Assist is temporarily unavailable.
The system limits have been reached (
Drive on.
#
When the causes no longer apply, the system will be available again.
If the display message does not disappear, stop the vehicle while paying attention to road and traffic conditions
#
and restart the engine.
* Blind Spot Assist is malfunctioning.
Consult a qualified specialist workshop.
#
* Active Blind Spot Assist is malfunctioning.
Consult a qualified specialist workshop.
#
Display messages and warning/indicator lamps 401
M
Solutions
page 193).
→
page 193).
→