Mercedes-Benz E-Class Sedan Operator's Manual page 105

To install: open rotating catch
#
outwards.
Insert brackets 2 of box 1
#
3.
Raise box 1 and press hooks
#
shelf 4.
Turn rotating catch 6 inwards to the stop.
#
To remove: turn left-hand rotating catch
#
clockwise and right-hand rotating catch
counter-clockwise by 90°.
Lower box
#
4, then pull box
holes 3.
Opening the stowage space under the trunk
floor
* NOTE Damage to the handle in the trunk
floor
If the handle in the trunk is left protruding,
the handle may be damaged.
Unhinge the handle before you close
#
6 and turn it
the trunk lid and clip it in place.
into outer holes
5 into rear
6
1 and pull it out of anchorages
1 backwards and out of
6
Pull handle 1 up and hook it into rain
#
trough 2.
Seats and stowing 103