Mercedes-Benz E-Class Sedan Operator's Manual page 147

Check if the transmitter frequency of the
#
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
R
Press and hold button 1,
#
wish to program.
Indicator lamp 4 flashes yellow.
% It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
Release the previously pressed button.
#
Indicator lamp 4 continues to flash yellow.
Point remote control 5 at a distance of 1 in
#
(1 cm) to 3 in (8 cm) towards buttons 1,
or 3.
Press and hold button 6 of remote control
#
5 until:
Indicator lamp 4 lights up green contin‐
R
uously. Programming is complete.
Indicator lamp 4 flashes green. Pro‐
R
gramming was successful. The rolling
code must also be synchronized with the
garage door system.
If indicator lamp 4 does not light up or flash
#
green: repeat the procedure.
Release all of the buttons.
#
2 or 3 that you % The remote control for the garage door drive
is not included in the scope of delivery of the
garage door opener.
Synchronizing the rolling code
Requirements
The garage door system uses a rolling code.
R
The vehicle must be within range of the
R
garage door or exterior gate drive.
2
The vehicle as well as persons and objects,
R
are located outside the sweep of the garage
door.
Driving and parking 145