Table of Contents
Advertisement
ASSEMBLY
1. Slide the brackets into their
positions.
• They will 'click' into place.
2. Connect the high pressure hose to
the pressure washer as shown and
tighten securely.
3. Insert the hose into the gun fully
4. Slide the hose clip towards the
hose to lock in place.
5. Insert the lance into the gun as
shown and twist to lock in place.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
7
Advertisement
Table of Contents
