Applying Chemicals And Cleaning Agents - Clarke JETSTAR 1850 Operation & Maintenance Instructions Manual

APPLYING CHEMICALS AND CLEANING AGENTS

To improve the cleaning performance, you can introduce chemical cleaning
agents (detergents) to the water jet using the detergent bottle attachment.
This is particularly useful when washing cars, greasy engine parts, or removing
oil spots on concrete etc.
CAUTION: IF YOUR EYES COME INTO CONTACT WITH ANY CLEANING
FLUIDS, RINSE THEM IMMEDIATELY WITH PLENTY OF FRESH CLEAN WATER
AND SEEK MEDICAL ADVICE IF REQUIRED.
To prepare for detergent application:
1. Remove the lance if fitted and
connect the detergent bottle
assembly to the gun as shown
2. Remove the detergent bottle and
fill with detergent.
• Only use detergents
recommended for use with
pressure washers such as
CLARKE Traffic Film Remover for
car cleaning, patio cleaning etc., or CLARKE Wash & Wax, both
available from your CLARKE dealer.
DESCRIPTION
Car Wash & Wax Shampoo
Concentrated Traffic Film Remover
Concentrated Traffic Film Remover
Ready To Use Traffic Film Remover
Ready To Use Traffic Film Remover
3. Replace the bottle.
4. Use the pressure washer as normal.
NOTE: When using the detergent bottle the pressure will be much lower then
normal.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SIZE
5 Litre
5 Litre
25 Litre
5 Litre
25 Litre
10
PART NUMBER
3050815
3050821
3050820
3050818
3050819