SHUTTING DOWN
When you have finished using the pressure washer, follow the procedure
shown below to switch off and disconnect the unit.
1. Set the switch to the OFF position.
2. Turn off the water supply at the
tap.
• To release the pressure in the
machine, pull and hold the
trigger until no more water
comes out of the nozzle.
3. Engage the trigger lock.
4. Disconnect from the power
supply.
5. Wind the hose onto the reel and
put the spray gun/lance into the
holder on the power washer.
STORAGE PROCEDURE
Disconnect from the water supply,
and ensure the system is completely
drained when not in use.
Store in a cool dry location.
Avoid storing the power washer at
freezing temperatures.
Residual water in the high pressure
pump of hose assembly may cause
permanent damage to the
components if it freezes.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
11