Do Not Disturb (Dnd) - Yealink SIP-T46G User Manual

Note The phone will beep softly every 30 seconds to remind you that you still have a call on hold.
To resume a held call:
1. Press or the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
• Press or
desired call.
• Press the corresponding line key to retrieve the call.
If more than two calls are on hold, a numbered prompt appears on the LCD screen, for example —2/4ll,
indicating that this is the second call out of four calls.

Do Not Disturb (DND)

You can use DND to reject incoming calls automatically on the phone. The prompt message —n New Missed
Call(s) (—nll indicates the number of missed calls) will appear on the LCD screen, and callers will receive a
busy message. All calls you receive while DND is enabled are logged to your missed calls list.
Note The prompt message will display only if Missed Call Log for the line is enabled
Do not disturb is local to the phone, and may be overridden by the server settings.
For more information, contact your system administrator.
You can enable/disable DND for the phone system, or you can customize DND for each or all accounts. Two
DND modes:
• Phone (default): DND is effective for the phone system.
• Custom: DND can be configured for each or all accounts.
You can receive incoming calls from authorized numbers when DND is enabled.
To activate DND in phone mode:
1. Press the DND soft key when the phone is idle.
The icon on the status bar indicates that DND is enabled.
Incoming calls will be rejected automatically and —n New Missed Call(s) (—n indicates the number of
missed calls. e.g., 1 New Missed Call(s)) will appear on the LCD screen.
User Guide for SIP-T46G IP Phone
to switch between the calls, and then press the Resume soft key to retrieve the
48