Yealink SIP-T46G User Manual page 53

You can also enable busy forward for all accounts. After busy forward was enabled for a specific account, do
the following:
1. Press
2. Press the All Lines soft key.
The LCD screen prompts —Copy to all lines?
3. Press the OK soft key to accept the change or the Cancel soft key to cancel.
c. If you select No Answer Forward, you can enable it for a specific account.
1. Press
No Answer Forward field.
2. Enter the destination number you want to forward unanswered
incoming calls to in the Forward to field.
3. Press
from the After Ring Time field.
The default ring time is 12 seconds.
4. (Optional.) Enter the no answer forward on code or off code
respectively in the On Code or Off Code field.
User Guide for SIP-T46G IP Phone
or to highlight the Busy Forward field.
or , or the Switch soft key to select Enabled from the
or , or the Switch soft key to select the ring time to wait before forwarding
53