Yealink SIP-T46G User Manual page 42

To place a call using the hands-free speakerphone mode:
Do one of the following:
• With the handset on-hook, press
Enter the desired number using the keypad.
ª
Press
ª
• With the handset on-hook, enter the desired number using the keypad.
Press
ª
To place a call using the headset:
Do one of the following:
• With the optional headset connected, press
Press the line key to obtain a dial tone.
ª
Enter the desired number using the keypad.
ª
Press
ª
• With the optional headset connected, press
number using the keypad.
Press
ª
The SIP-T46G IP phone can handle multiple calls at a time. However, only one active call (the call that has
audio associated with it) can be in progress at any time, other calls are placed on hold. The SIP-T46G IP phone
can handle a maximum of 16 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T46G IP phone. To place a new call during an active call, do one
of the following:
• Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
ª
Press
ª
• Press or the Hold soft key to place the original call on hold.
Press the NewCall soft key.
ª
Enter the desired number using the keypad.
ª
Press
ª
You can press or
call.
User Guide for SIP-T46G IP Phone
, or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
to switch between calls, and then press the Resume soft key to retrieve the desired
or the line key to obtain a dial tone.
to activate the headset mode.
to activate the headset mode. Enter the desired
42