Yealink SIP-T46G User Manual page 63

3. Press the 123 soft key to select the proper input mode and then enter
the voice mail access code (e.g., *4).
4. Press the Save soft key to accept the change or the Back soft key to cancel.
To listen to voice mails:
1. When the LCD screen prompts that the phone receives a new voice mail and the
power indicator LED slow flashes red, you can press
the voice mail access code.
2. Follow the voice prompt to listen to your voice mails.
Note Before listening to voice mails, make sure the voice mail access code has been configured.
When all new voice mails are retrieved, the power indicator LED will go out.
To view the voice mail via phone user interface:
1. Press Menu->Message->Voice Mail->View Voice Mail.
The LCD screen displays the amount of new and old voice mails.
2. Select an account and then press the Connect soft key to listen to voice mails.
User Guide for SIP-T46G IP Phone
or the Connect soft key to dial out
63