Yealink SIP-T46G User Manual page 46

5. Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General Information.
To use auto redial:
When the called party is busy, the following prompt will appear on the LCD screen of the phone:
1. Press the OK soft key to activate auto redial. The following prompt
will appear on the LCD screen of the phone:
2. Wait for the designated period of time or press the OK soft key to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
User Guide for SIP-T46G IP Phone
46