Yealink SIP-T46G User Manual page 34

Placing Calls to Contacts
To place a call to a contact from the local directory:
1. Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory enabled in the
ª
directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local Directory to enter the
local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft key.
ª
3. Press or
4. Do one of the following:
If only one number for the contact is stored in the local directory, press the Send soft key to dial
ª
out the number.
If multiple numbers for the contact are stored in the local directory, press the Send soft key to
ª
display a list of numbers.
Press
Press the Send soft key to dial out the number.
Searching for Contacts
To search for a contact in the local directory:
1. Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory enabled in the
ª
directory by default.
User Guide for SIP-T46G IP Phone
to highlight the desired contact.
or to highlight the desired number.
34