Yealink SIP-T46G User Manual page 52

3. (Optional.) Enter the always forward on code or off code respectively in the
On Code or Off Code field.
You can also enable always forward for all accounts. After always forward was enabled for a
specific account, do the following:
1. Press
2. Press the All Lines soft key.
The LCD screen prompts —Copy to all lines?
3. Press the OK soft key to accept the change or the Cancel soft key to cancel.
b. If you select Busy Forward, you can enable it for a specific account.
1. Press
2. Enter the destination number you want to forward incoming calls
to when the phone is busy in the Forward to field.
3. (Optional.) Enter the busy forward on code or off code
respectively in the On Code or Off Code field.
User Guide for SIP-T46G IP Phone
or to highlight the Always Forward field.
or , or the Switch soft key to select Enabled from the Busy Forward field.
52