Kubota KX080-4 Operator's Manual page 16

Hide thumbs Also See for KX080-4:
Table of Contents

Advertisement

6
SAFE OPERATION
-
7. Do not open the radiator cap before the radiator has
cooled down sufficiently
First loosen the cap to the first stop and allow the
system enough time to release the remaining
pressure. Then loosen the cap completely.
8. To avoid short-circuiting the battery, always remove
the ground cable first and attach the positive cable
first.
9. Oil under high pressure can penetrate the skin and
may be harmful to your health if not treated
immediately.
10. Leaking hydraulic fluid has enough pressure to
penetrate the skin and cause serious injuries.
Leakages from pin holes can be totally invisible. Do
not use hands for checking for leaks. Always use a
piece
of
wood
or
recommended that you use a face mask or eye
protection.
Should injuries occur with leaking hydraulic fluid,
contact a doctor immediately. This fluid can cause
gangrene or serious allergic reactions.
11. To avoid environmental damage from acid and heavy
metals, dispose of the battery appropriately.
12. Observe all laws and regulations concerning the
disposal of used oil, coolants, solvents, hydraulic
fluids, battery acids and batteries.
cardboard.
It
is
strongly
13. To avoid fire, do not heat the hydraulic components
(tanks, pipes, hoses, cylinders) before they have been
drained and washed.
14. Use eye protection or a face mask to protect the eyes
and respiratory system against dust and other foreign
particles.
15. Securely support excavator with stands or suitable
blocking before working underneath. For your safety,
do not work under any hydraulically supported
devices. They can settle, suddenly leak down, or be
accidentally lowered.
16. Do not dismantle the spring of the track tensioner. If
dismantling is necessary, contact your KUBOTA
dealer where the machine was purchased, or
competent service shop. The assembly must be done
according to the KUBOTA work shop manual (W.S.M.)
for the product involved.
17. When lifting the machine itself with an attachment,
place a safety block or safety post to prevent the
machine from rolling over. Keep the lock lever for
attachment control in the "LOCK" position.
18. Inspect ROPS / OPG (Top Guard Level I) for damage
and if damage is found contact your KUBOTA dealer
for repair.

Advertisement

Table of Contents
loading

Table of Contents