Table of Contents
Advertisement
114 LIST OF SCREENS
Inhibit
Warning
switch
lamp
Blinking
Blinking
(yellow)
(red)
Blinking
Blinking
(yellow)
(red)
Blinking
Blinking
(yellow)
(red)
Display
A Auto
regeneration
locked.
A Operator needs preparation of
DPF regeneration.
A When the message "Now HP
limited" appears on the display,
the DPF must be clogged. To
protect the DPF, engine output is
limited.
A When the pilot control lock lever is
raised up, the engine will stop after
60 seconds in order to protect
DPF.
A When the Pilot control lock lever is
down, the engine will not stop
while the engine output is limited.
A DPF must be repaired.
A To protect the DPF, engine output
is limited.
A When the pilot control lock lever is
raised up, the engine will stop after
60 seconds in order to protect
DPF.
A When the Pilot control lock lever is
down, the engine will not stop
while the engine output is limited.
A DPF must be exchanged.
A To protect the DPF, engine output
is limited.
Meaning
process
is
A Move the machine to a safe place
A Increase the engine speed over
A Make
Immediately contact your local dealer.
(Refer to No. 41 in "NAVIGATION
LIST OF SCREENS" section.)
Immediately contact your local dealer.
(Refer to No. 42 in "NAVIGATION
LIST OF SCREENS" section.)
Required operator action
and release the inhibit switch.
1900
rpm.
Auto
regeneration
starts.
sure
that
no
animals, plants and flammable
materials are within the immediate
working area.
(Refer to No. 40 in "NAVIGATION
LIST OF SCREENS" section.)
people,
Advertisement
Table of Contents
