Table of Contents
Advertisement
EXCAVATOR OPERATION
39
AUXILIARY PORT OPERATION
The auxiliary port enable switch is used to operate hydraulic attachment such as hammers.
BSelecting the Action Modes
The AUX port has been factory-set to three action modes. You can select one of them. Up to five action modes can be
preset. Each time the AUX port enable switch (switch 3) is pressed, the action modes change over one after another. And
the icon and action mode number on the screen change accordingly.
A When turning the starter key to the "RUN" position, the action mode will return to the last action mode used.
A AUX1 or AUX2 functions are workable while automatic regeneration. Refer to page 47.
Advertisement
Table of Contents
