Table of Contents
Advertisement
NAVIGATION LIST OF SCREENS
If an error occurs with the machine, one of the following messages appears in the LCD display.
In case of trouble, immediately contact your local dealer for inspection and repair.
While the (
) (information mark) appears onscreen, press the information switch, and detailed information will be
displayed.
Notify your local dealer of this and other information.
Message
No.
Clock setting request
1
Tilt up the lock lever.
2
Tilt down the lock
lever.
3
Start the engine.
4
Failure to pull out the
key
5
Authentication
complete: Draw out
the key.
6
Problem or failure
(What happened)
The battery is disconnected,
thereby requiring to set the
clock.
This message indicates a
procedural step.
This message indicates a
procedural step.
This message indicates a
procedural step.
This message appears if the
key switch is set at "STOP"
and left at this position for a
while.
This message appears when
the anti-theft setting key is
authenticated.
Machine behavior
(Provisional measure)
Press Switch 5 to set the
clock.
Tilt up the pilot control lock
lever.
This message disappears by
tilting up the pilot control lock
lever.
Tilt down the pilot control
lock lever.
This message disappears by
tilting down the pilot control
lock lever.
Start the engine.
This message then
disappears.
Draw out the key.
Draw out the key. This
message then disappears.
LIST OF SCREENS
Correction
-
-
-
-
-
-
105
Advertisement
Table of Contents
