Table of Contents
Advertisement
Message
No.
Out of fuel
14
Fuel sensor error
15
Charging system error
16
Engine oil pressure
error
17
Overvoltage
18
Overheat advance
warning
Water temperature
rising
19
Problem or failure
(What happened)
Fuel is running out.
The fuel sensor system is in
trouble.
Charging system is in
trouble.
The battery is not charging.
The engine lubricating
system oil pressure is too
low. Stop the engine.
This message appears if a
jumper cable is connected to
a 24V battery or improper
device to get the engine
started or if the alternator is
in trouble.
Water temperature is rising
somewhat higher than
specified.
Machine behavior
(Provisional measure)
-
The fuel level indicator does
not appear on the
meter.Press the display
selector switch, and the
normal display is switched
back.The machine's other
functions are still operative.
The machine works until the
battery goes dead.
The engine may get burnt
out. Immediately stop the
engine.
Immediately interrupt the
engine if with a 24V battery.
When the engine gets
restarted and is running with
no message appearing, it
means there is no problem.
Operate with the load a little
lessened.
Check the radiator and other
components for clog.
Immediately clean them up.
LIST OF SCREENS
Correction
Add fuel.
Immediately contact your
local dealer.
Immediately contact your
local dealer.
Immediately contact your
local dealer.
If this message still appears,
immediately ask for repair.
-
107
Advertisement
Table of Contents
