WAGNER PEA-C4 Twin-HiCoat Operating Manual page 12

E
P
Spray gun 2
Peac4twin_0003bn

Connect the spray guns 1 and 2 to the ProfiTech control using the electrical cable E .

Connect the hose for the powder feed P to the spray guns 1 and 2 .

Connect the hose for the atomizing air A to the spray guns 1 and 2 .

Mount the spray guns onto the robot arm using the adapter K .
Hint
It is recommended to use the Wagner powder injector PI-F1 . He allows automatically
blowing through and/or flushing the guns before switching them off.
12
X
Electrical connection
Spray gun 1 and 2
K
P
A
Spray gun 1
Spray gun cable 2
390832
-
PEA-C4 Twin-HiCoat
Preparing the spray gun
Connection box
362202
Spray gun cable 1
09/2014