WAGNER PEA-C4 Twin-HiCoat Operating Manual page 20


Prior to re-fitting, check whether the mating surface on the electrode holder 3 and in the
spray gun housing 5 have been thoroughly cleaned so that the electrode tip is electrically
connected to the high-voltage generator.
2
1
20
3

5

peac4_0006
390832
Carefully fit the electrode holder 3 in the spray gun
housing 5 .
Slide the fan spray nozzle 2 back over the electrode
holder 3 and fasten in place using the outer nut 1 .
-
PEA-C4 Twin-HiCoat
Maintenance and cleaning
030302_ .doc
030303_ .doc
09/2014