Programmable Options - CrimeStopper CS-2015.FM.RevB Installation Instructions Manual

PROGRAMMING – CS-2015FM TRANSCEIVER / CS-2011RS TRANSMITTER
(BLUE WIRE GROUNDED)
CS-2015FM
To access programmable options:
1. Open hood (Ground Blue wire if no hood pin is installed).
2. Turn Key to the ON position
3. Press program button 5 times, after a few seconds the unit will flash the lights 5 times.
4. Push the valet/program button [again] the number of times that corresponds to the option number desired. You
should get a light flash after each button press.
5. When you reach the desired programming level, Press the button on the remote that corresponds to the setting you
desire. See the chart below for option values and descriptions. See Options Chart.
6. Turn Ignition OFF, Close hood and check for changed features. Change each option individually repeating STEPS
1-5 above.
IGN
OFF
START
FLASH 2, 3, or 4 X's
C S
RIME TOPPER
CS-2011RS

PROGRAMMABLE OPTIONS

PRESS 4X's
OFF
WAIT FOR
4 FLASHES
IGN