CrimeStopper CS-2015.FM.RevB Installation Instructions Manual page 16

Option # Option
Description
1 Tach Learning
2 Autolock with Ignition ON or OFF.
3 Passive Arming
4 Active Re-Arm
5 Passive Locks
6 Parking Lights on
w/Disarm
7 GREEN/RED
Wire function
8 PINK Wire function
9 Siren Chirps on
Remote Start
10 Disarm on Trunk pop ON or OFF
11 Open Door Warning
12 Door Lock Pulse
Time
13 Double Unlock Pulse ON = 2 Unlock pulses
14 Remote Start Engine
Run Time
15 Option reset
NOTE: Options can be instantly restored to Factory Default Values using Option Reset at #15. To restore default
values, enter programming options, go to Option #15 then press the UNLOCK Button. All programming options should
be restored to (*) values (See chart above).
PROGRAMMABLE OPTIONS TABLE
Option values
See Tach Programming
ON or OFF
ON or OFF
ON or OFF
ON or OFF
Trunk POP output or
M.A.P. output
Glow Plug input or
Carjack Trigger input
ON or OFF
5 Sec. or 60 Sec.
0.75 Sec. (Standard) OR
3.0 Sec. (European
Vacuum)
OFF = 1 Unlock pulse
Button #1 = 12 Min.
Button #2 = 24 Min.
Button #3 = 36 Min.
Button #4 = 48 Min.
Button #2 Only
* = DEFAULT
Button #1 Button #2
(LOCK) (UNLOCK)
Learn Tach
OFF *ON
ON *OFF
ON *OFF
ON *OFF
OFF *ON
M.A.P. *Trunk Pop
Carjack *Glow Plug
Trigger Input
OFF *ON
OFF *ON
5 Sec. *60 Sec.
3 Sec. *0.75 Sec.
ON *OFF
12 Min. *24 Min.
Reset all options
to Default