Programmable Options - CrimeStopper CS-2015.FM.RevB Installation Instructions Manual

PROGRAMMABLE OPTIONS

1. TACH LEARNING
This option has no values or default settings. See Tach (RPM) Reference Mode Section on pages 13-14.
2. AUTOLOCK/UNLOCK W/IGNITION
Controls whether the doors will automatically lock when the ignition is turned on and will unlock when the ignition is
turned off. Doors will not lock if they are open to prevent locking the keys in.
3. PASSIVE ARMING
With this option ON, the unit will arm itself 30 Seconds after the ignition is turned off and the last door has been
closed. Lights will flash twice when last door is closed indicating passive countdown. If a door is reopened, the
system will wait and begin countdown again when closed.
4. ACTIVE RE-ARM
Active Re-arming allows the system to re-arm itself 30 seconds after disarmed with the transmitter if a door has not
been opened. This is handy if the vehicle is accidentally disarmed without your knowledge.
5. PASSIVE LOCKS
This option controls whether the doors will lock when Passive Arming occurs. Note: This may increase the risk of
locking keys in the vehicle.
6. PARKING LIGHTS ON WITH DISARM
Keeps parking lights on when system is disarmed to assist in locating and providing illumination near your vehicle
when approaching at night for safety.
7. GREEN/RED WIRE PROGRAMMING: TRUNK POP (AUX 1) or M.A.P. OUTPUT
This option controls whether the system's GREEN/RED wire functions as Remote Aux. Output 1, or functions as an
Output for (MAP) Mobile Accessories Protection. Mobile accessory protection activates only in Valet Park Mode.
See Wiring Section page 4 for specific details and a diagram.
8. PINK WIRE PROGRAMMING: CAR JACK TRIGGER or GLOW PLUG INPUT
This option controls whether the system's PINK input wire functions as a Glow Plug input wire for Diesel Engines or
a +12V input for tripping a Carjack countdown. For Glow plug, this wire should be connected to the wait to start light
circuit and for Carjack this wire can be connected to a hidden button, switch, or a (+) Positive door pin circuit.
9. SIREN CHIRPS WITH REMOTE START ACTIVATION
This option controls whether the system gives 3 short siren chirps when engaging a remote start.