Quick Start Guide
Ground the transmitter: option 3
Procedure
1. Ground sensor wiring shield at the sensor, if possible.
2. Ensure the sensor wiring and signal wiring shields are electrically
isolated from the transmitter housing and other grounded fixtures.
3. Ground signal wiring shield at the power supply end.
3.3.2
Ground thermocouple inputs
Procedure
1. Ground sensor wiring shield at the sensor.
10
A. Sensor wire
B. Transmitter
C. Shield ground point
A. Sensor wire
B. Transmitter
C. Shield ground point
March 2020
Rosemount 3144P