28.19 Setting The Number Of Active Groups; 28.20 Loading The Default Data; Water Meter; Viewing Of The Litres Of Water Used - Wega Wegaconcept Use And Maintenance Manual

28.19 Setting the number of active groups

To set the number of active groups, proceed as
follows:
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)
Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Confirm to access the menu
GROUPS NUMBER
ENTER Confirm to exit the menu.
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
To exit the programming menu

28.20 Loading the default data

To load the default data, proceed as follows:
insert the USB drive in the
programming reader (7);
turn on the machine by
pressing keys (1), (2), (3) on
the left keyboard.
1 2 3
Technical manual
X
29

Water meter

29.1

Viewing of the litres of water used

To view the litres of water used, proceed as follows:
insert the USB drive in the
programming reader (7);
hold down the ( ) button
for at least 5 seconds.
the litres of water used (on
the left) and the quality of
the water set for the next
regeneration (on the right)
will be displayed.
29.2

Resetting the litres of water used

RIGENER. SOFTENER
000100
Amount of water used
proceed as indicated in the previous paragraph
hold down the ( ) key for 10 seconds, until the litres
of water used is reset.
7
RIGENER. SOFTENER
000000
Wegaconcept
7
001500
Amount of water set in
litres
001500
51