Club Car Cafe Express Maintenance And Service Manual page 65

WHEEL BRAKE ASSEMBLIES
2. To provide slack in the brake cables, loosen the equalizer retaining nuts (1 and 5) on the equalizer rod (2)
(Figure 6-15, Page 6-7).
3. Loosen the front brake equalizer rod (Figure 6-16, Page 6-7).
4
1
2801
Figure 6-15 Rear Equalizer Adjustment
4. Remove the dust cover (4) on the left and right rear brake cluster assemblies (Figure 6-17, Page 6-7).
2804
Figure 6-17 Rear Brake Adjustment Bolt
5. Use a torque wrench and a 7 mm 8–point socket or Club Car brake adjustment tool (CC P/N 1013582) to turn
the brake adjustment bolt (5) on each brake clockwise until it is tightened to 15 ft·lb (20.3 N·m) then back off 5
clicks. See following NOTE.
NOTE: If a wheel can still be turned by hand after step 4, inspect the brake clusters and clean and/or replace all
parts that do not work properly.
6. Repeat procedure at front brake clusters.
2
2802
Figure 6-16 Front Equalizer Adjustment
2803
Figure 6-18 Front Brake Adjustment Bolt
2018 Café Express Maintenance and Service Manual
Brake Adjustment
1 3
6
5
6
Page 6-7