Club Car Cafe Express Maintenance And Service Manual page 49

ACCELERATOR AND BRAKE PEDAL GROUP
2999
Figure 5-2 Brake Pedal Weldment Through Floor
3. Position and attach brake pedal assembly, mounting blocks (3 and 8), and washers (10) to vehicle frame as
shown. Tighten the bolts (11) and nuts to 95 in·lb (10.7 N·m). Figure 5-1, Page 5-2.
4. Tighten the nut (2) on the equalizer rod (1) so that brake pedal free-play is from 1/4 inch to 1/2 inch (6 mm to 13
mm) (Figure 5-3, Page 5-3). See following NOTE.
NOTE: Brake pedal free-play is the distance the brake pedal can be pressed before the brake actuator arm moves.
5. Tighten the jam nut (3) while holding the adjustment nut (2) in the correct position.
6. Adjust the pedal group. Refer to the appropriate adjustment procedure:
– For gasoline vehicles, see Pedal Group Adjustment on page 5-7.
Dimension A: 1/4 inch to 1/2 inch (6 mm to 13 mm)
Note: Equalizer bracket may be inverted on some vehicles.
1369
2
1
Figure 5-3 Brake Pedal Free-Play Adjustment
2018 Café Express Maintenance and Service Manual
Brake Pedal and Park Brake
A
3
5
Page 5-3