Programming With Crestron D3 Pro Or Systembuilder; Programming With Simpl Windows - Crestron CLF-DIMRFB Operation Manual

Crestron CLF-DIMRFB
Software (Continued)
Program with simple
wizards for lighting
systems using a
CLF-DIMRFB (optional
but recommended).
Programming with Crestron D3 Pro or
SystemBuilder
Crestron D3 Pro and SystemBuilder are the easiest methods of
programming, but do not offer as much flexibility as SIMPL Windows.
For additional details, download D3 Pro or SystemBuilder from the
Crestron website and examine the extensive help files.

Programming with SIMPL Windows

NOTE: While SIMPL Windows can be used to program the
CLF-DIMRFB, it is recommended to use D3 Pro or SystemBuilder for
configuring system.
SIMPL Windows is Crestron's premier software for programming
Crestron control systems. It is organized into two separate, but equally
important "Managers".
Configuration
Configuration Manager is the view where programmers "build" a
Manager
Crestron control system by selecting hardware from the Device Library.
• To incorporate the CLF-DIMRFB into the system, first drag the
Operations Guide – DOC. 6479
TASK
C2N-MNETGW (MNET Gateway) from the Wireless Receivers |
Wireless Receivers (RF) folder of the Device Library and drop it in
the System Views. Then drag the CLF-DIMRFB from the Lighting
| Wall Dimmers/Switches (infiNET CLW Series) folder of the
Device Library and drop it on the C2N-MNETGW.
infiNET
REQUIRED SOFTWARE
VERSION
Crestron D3 Pro version 2.0.6 or
later or SystemBuilder version
2.0.6 or later. Refer to software
release notes or Crestron website
for other required Crestron
software packages.
™ Lamp Dimmer: CLF-DIMRFB • 9
infiNET
™
Lamp Dimmer