Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron CLF-DIMRFB
Summary of Contents for Crestron CLF-DIMRFB
- Page 1 Crestron CLF-DIMRFB infiNET™ Lamp Dimmer Operations Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
-
Page 3: Table Of Contents
Hardware Hookup ... 6 Programming Software ... 8 Earliest Version Software Requirements for the PC ... 8 Programming with Crestron D3 Pro or SystemBuilder ... 9 Programming with SIMPL Windows ... 9 Example Program ... 11 Uploading and Upgrading... 12 Establishing Communication... -
Page 5: Infinet ™ Lamp Dimmer: Clf-Dimrfb
• Provides dimming control of a conventional floor lamp or table lamp • Enables local dimming control via a built-in foot switch • Crestron System Integration via infiNET™ Wireless Network Specifications Specifications for the CLF-DIMRFB are listed in the following table. CLF-DIMRFB Specifications SPECIFICATION Load Ratings Incandescent /... - Page 6 Humidity Enclosure Dimensions Height Width Depth Weight Available Accessories C2N-MNETGW 1. Requires set up with Crestron Toolbox™. 2. C2N-MNETGW gateway/transceiver required. 2 • infiNET ™ Lamp Dimmer: CLF-DIMRFB Crestron CLF-DIMRFB DETAILS Version 3.137 or later 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6 MHz),...
-
Page 7: Physical Description
Crestron CLF-DIMRFB Physical Description This section provides information on the connections, controls, and indicators available on your CLF-DIMRFB. CLF-DIMRFB Physical View CLF-DIMRFB Overall Dimensions (Front view) Operations Guide – DOC. 6479 infiNET (8.00 cm) 0.54 in (1.36 cm) 2.28 in (5.80 cm) 2.37 in... - Page 8 InfiNET Lamp Dimmer CLF-DIMRFB Overall Dimensions (Top view) Connectors, Controls, & Indicators CONNECTORS, CONTROLS, & INDICATORS AC Receptacle Mode Selection Switch * Refer to “Operation” on page 14. 4 • infiNET ™ Lamp Dimmer: CLF-DIMRFB (8.92 cm) 4' LONG, AC-PLUG, 3 CONDUCTOR...
-
Page 9: Industry Compliance
Crestron CLF-DIMRFB Industry Compliance As of the date of manufacture, the CLF-DIMRFB has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules. Operation is... -
Page 10: Setup
Setup Identity Code The MNET ID of the CLF-DIMRFB has been factory set to 01. After an infiNET device is added to an infiNET network, its MNET ID must be changed to a value that can be addressed by the control system program (03 to 20). - Page 11 ™ Crestron CLF-DIMRFB infiNET Lamp Dimmer Hardware Connections for the CLF-DIMRFB TO ANY 120V AC, 60Hz POWER SOURCE TO LAMP ™ Lamp Dimmer: CLF-DIMRFB • 7 Operations Guide – DOC. 6479 infiNET...
-
Page 12: Programming Software
Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. -
Page 13: Programming With Crestron D3 Pro Or Systembuilder
Crestron website and examine the extensive help files. Programming with SIMPL Windows NOTE: While SIMPL Windows can be used to program the CLF-DIMRFB, it is recommended to use D3 Pro or SystemBuilder for configuring system. SIMPL Windows is Crestron’s premier software for programming Crestron control systems. - Page 14 MNET ID as shown in the following illustrations. C2Net Device, Slot 9 • Additional CLF-DIMRFB devices are assigned different MNET ID numbers as they are added. • If necessary, double click a device to open the “Device Settings”...
-
Page 15: Example Program
Programming Manager is the view where programmers "program" a Manager Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View. A description for each signal in the symbol is described in the SIMPL Windows help file (F1). -
Page 16: Uploading And Upgrading
Establishing Communication Use Crestron Toolbox for communicating with the CLF-DIMRFB; refer to the Crestron Toolbox help file for details. There is a single method of communication: indirect serial communication. Indirect Serial Communication C2N-MNETGW... -
Page 17: Programs And Firmware
Programs and Firmware • Display the network device tree (Tools | Network Device Tree) to show all network devices connected to the control system. Right- click on the CLF-DIMRFB to display actions that can be performed on the CLF-DIMRFB: ⇒... -
Page 18: Operation
InfiNET Lamp Dimmer Operation The CLF-DIMRFB may be warm to the touch during operation. This is normal. Mode Selection Switch These dimmers use a three-position mode selection switch to set the mode of operation. When the mode selection switch is in the “OFF” position, the foot switch will not have any function and the load is disconnected from the power source. - Page 19 Switch to “RUN” mode to store preset. (User can abort any changes made in SET mode by switching unit OFF before returning to RUN.) ™ Lamp Dimmer: CLF-DIMRFB • 15 infiNET Lamp Dimmer...
-
Page 20: Special Functions
NOTE: In environments where multiple gateways are installed, only one gateway should be in ACQUIRE mode at a time. 2. Place the CLF-DIMRFB in the ACQUIRE mode by doing the following: a. Move the mode selection switch to the “OFF” position. - Page 21 To clear a dimmer’s gateway information: 1. Move the mode selection switch to the “OFF” position. 2. Press and hold the foot switch on the CLF-DIMRFB, while sliding the mode selection switch to the “RUN” position. 3. Hold the foot switch for approximately 10 seconds until the LED flashes twice.
- Page 22 Blink OFF for one second, HIGH for one second. Blink OFF for ¼ second, HIGH for ¼ second. 1. Refer to “Enter ACQUIRE Mode” on page 16. 2. Refer to the Crestron Toolbox help file. 18 • infiNET ™ Lamp Dimmer: CLF-DIMRFB Crestron CLF-DIMRFB...
-
Page 23: Problem Solving
Crestron CLF-DIMRFB Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CLF-DIMRFB Troubleshooting TROUBLE Dimmer does not function. Dimmer does not function as expected. - Page 24 InfiNET Lamp Dimmer CLF-DIMRFB Troubleshooting (Continued) TROUBLE Dimmer does not respond to control system commands. (Continued on following page) 20 • infiNET ™ Lamp Dimmer: CLF-DIMRFB Crestron CLF-DIMRFB POSSIBLE CAUSE(S) If the LED blinks OFF for ¼ second four times, then returns to...
-
Page 25: Bootloader
“OFF” and back to “RUN” or “SET”. Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (http://www.crestron.com/manuals). Operations Guide – DOC. 6479 infiNET POSSIBLE... -
Page 26: Further Inquiries
Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 27: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 28 Crestron Electronics, Inc. Operations Guide – DOC. 6479 15 Volvo Drive Rockleigh, NJ 07647 (2014965) Tel: 888.CRESTRON 05.06 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.