4�9�- Impulse Output; 4�10�- Infrared Communications Port - Circutor CEM-C10 Instruction Manual

CEM-C10
The screen is displayed if there is a CEM M-RS485 (communications interface for units of the CEM family)
(4)
connected to the unit.
4�9�- IMPULSE OUTPUT
The energy meter has optocoupler type outputs capable of generating impulses at a previously pro-
grammed rate. (See
"4.7.1. Impulse output weight"
4�10�- INFRARED COMMUNICATIONS PORT�
In all versions, the unit has a serial optical communications port, in compliance with the UNE EN
62056-21:2003 Standard.
Instruction Manual
Table 8 (Configuration): Manufacturer information screens�
Screen Parameters
32-bit CRC (high and low-order)
and
"4.7.2. Impulse output type"
)
27