4�5�- Instantaneous Value Display - Circutor CEM-C10 Instruction Manual

CEM-C10
4�5�- INSTANTANEOUS VALUE DISPLAY
To open the screens where the instantaneous value are viewed, long press the
in standby mode.
The home screen is displayed Figure 8:
Long press the key to open the different screens.
Short press the key to browse the different screens (see
The standby mode is activated again when no key is pressed for 60 seconds.
Instruction Manual
Figure 8: Instantaneous Value main screen�
Table 6: Instantaneous value screens
Screen
).
Table 6
Parameters
Voltage
Current
Active power
Reactive power
Apparent power
Power factor
key on the display
15