Table of Contents
Advertisement
Crestron C2N-VEQ4
Cresnet 4-Channel Digital Volume
Control: C2N-VEQ4
Introduction
Operations Guide - DOC. 6135A
Cresnet 4-Channel Digital Volume Control
Features and Functions
®
The Crestron
C2N-VEQ4 Cresnet
digitally controlled 4-channel audio processor that incorporates volume, tone, mixer
and equalization capabilities. Each channel has independent settings for volume,
treble, bass, mute, and mixer controls plus a 12-band parametric equalizer.
Volume/tone controls are compatible with both X-Generation and 2-Series control
systems. Equalization and mixer controls are only accessible from 2-Series
processors.
Refer to the simplified block diagram provided on the next page.
Functional Summary
•
Four balanced/unbalanced audio I/O channels
•
24-bit 96KHz A/D and D/A converters with dual DSPs provide
improved audio quality
•
Independent settings for volume, treble, bass, and mute per channel
•
4 x 4 matrix mixer controls set the percentage of each input desired at
each output (any input to any output)
•
Five modes of audio equalization per channel
- a ten-band graphic equalizer and two-band parametric equalizer
- a five-band graphic equalizer and seven-band parametric equalizer
- a speech-optimized five-band graphic equalizer and seven-band
parametric equalizer
- a three-band graphic equalizer and nine-band parametric equalizer
- a full twelve-band parametric equalizer
•
Touch settable ID capable
Volume, bass, and treble ramp times, scaling, preset levels, and volume muting may
be specified on a per-channel basis. All of these aspects are software controllable.
Volume, bass, and treble control may be sent to more than one channel via software
to support stereo applications.
Cresnet 4-Channel Digital Volume Control: C2N-VEQ4 • 1
®
4-Channel Digital Volume Control module is a
Advertisement
Table of Contents
