Table of Contents
Advertisement
Crestron C2N-VEQ4
Operations Guide - DOC. 6135A
Cresnet 4-Channel Digital Volume Control
File Transfer | Send Program Command
3. The "Send Program" window appears, as shown after this step. Click
Browse, locate the compiled file (.spz for PRO2) and click Open. This
will display the program's header information and enable one or both of
the What to Send check boxes. If the program does not contain any
SIMPL+ modules, only the SIMPL Program check box will be enabled.
If it does contain SIMPL+ modules, then the SIMPL+ Program(s) check
box will also be enabled. Select one or both check boxes and then click
Send Program to begin the transfer.
NOTE: Refer to the latest version of the 2-Series Control System Reference Guide
(Doc. 6256) or the respective Operations Guide for the control system for details
about the other fields shown on the "Send Program" window.
"Send Program" Window
4. To verify that the program has been transferred successfully, select
Diagnostics | Report Program Information. This should display a
window that provides details about the current program loaded into the
control system.
Cresnet 4-Channel Digital Volume Control: C2N-VEQ4 • 29
Advertisement
Table of Contents
