Crestron DMPS3-4K-250-C Do Manual

DO GUIDE
DMPS3-4K-250-C/DMPS3-4K-350-C
3-Series 4K DigitalMedia™ Presentations Systems
®
DO Install the Device
The Crestron DMPS3-4K-250-C and DMPS3-4K-350-C can be mounted into a rack or placed onto a flat surface.
®
Mounting into a Rack
The DMPS3-4K-250-C and DMPS3-4K-350-C each occupy 3U of rack
space. Using a #1 or #2 Phillips screwdriver, attach the two included rack
ears to the device. Then, mount the device into the rack using four mounting
screws (not included).
Placing onto a Flat Surface
When placing the device onto a flat surface or stacking it with other
equipment, attach the included feet near the corners on the underside of the
device.
DO Connect the Device
Connect the device as required for the application.
Connecting the DMPS3-4K-250-C
INPUT 1-4:
From sense output of
digital output devices
(24 volts maximum)
IR - SERIAL OUT 1-4: IR IN:
RELAY 1-4:
To IRP2 IR emitter probe From
To
or one-way serial CNXRMIRD controllable COM A and COM B:
controlled devices IR receiver
devices To RS-232 devices
L R L R
L R L R L R
AUD IN 1-5: HDMI INPUTS 1-6: MC/LN 1-6:
From balanced/ From HDMI ® From balanced
unbalanced stereo audio/video sources microphone/
line-level analog line-level
audio sources audio sources
Mounting into a Rack
SPEAKER OUTPUT
CLASS 2 WIRING:
To 4-ohm/8-ohm
stereo speakers or SERVICE:
70-volt/100-volt For factory
mono speakers use only
Ground
PoDM+
INPUT PWR: 100-240V~6.0A
NET: 50/60 Hz:
From Crestron
To Cresnet ® PoDM+ power From ac
devices
supply 1 power outlet
L R L R L R
DM INPUT: HDMI DM OUTPUT: CONTENT CONTROL LAN:
From DM 8G+ ® OUTPUT: To DM 8G+ LAN: SUBNET: 10BASE-T/
output of DM input of DM 10BASE-T/ To Crestron 100BASE-TX/
® To HDMI
transmitter or display receiver or 100BASE-TX local 1000BASE-T
other DM other DM Ethernet to network Ethernet to
device or from device or to LAN for device LAN
1
HDBaseT ® device 1 HDBaseT AirMedia or
device 1 H.264 content
input (optional)
2
PROG OUT:
Audio output to
ampli er or
ampli ed speakers
DO Check the Box
QUANTITY PRODUCT
2 Bracket, Rack Ear, 3U
1 Cable, USB 2.0, A - B, 6' (1.83 m)
3 Connector, 2-Pin
1 Connector, 3-Pin
4 Connector, 4-Pin
15 Connector, 5-Pin
2 Connector, 8-Pin
4 Foot, 0.5" x 0.5" x 0.23", Rubber
1 Power Cord, 6' 7" (2 m)
6 Screw, 6-32 x 5/16", Undercut Head, Phillips
Connecting the DMPS3-4K-350-C
From sense output of
digital output devices
(24 volts maximum)
IR - SERIAL OUT 1-4: IR IN:
To IRP2 IR emitter probe From
or one-way serial
CNXRMIRD
controlled devices IR receiver
L R L R
L R L R L
AUD IN 1-5:
From balanced/
unbalanced stereo
line-level analog
audio sources
DO Determine the Address of the Device
The DMPS3-4K-250-C and DMPS3-4K-350-C can be addressed using the hostname of the device. The default hostname is DMPS3-xxxxxxxx, where
xxxxxxxx consists of the last eight characters (excluding punctuation) of the MAC address. For example, if the MAC address is 00:10:7F:08:09:AA:05, the
default host name is DMPS3-0809AA05. The MAC address is labeled on the rear panel of the device.
Alternatively, the DMPS3-4K-250-C and DMPS3-4K-350-C can be addressed using the IP address of the device. By default, DHCP is enabled. To set a static
IP address, use any of the following:
• Crestron Toolbox™ software on a PC that connects to the device via the Ethernet network
NOTE: The Device Discovery Tool can be used to find the current IP address.
AUX OUT 1-2:
• A USB connection to the COMPUTER port on the front panel of the device
To video
teleconferencing
• The front panel LCD display menu
or codec input
SPEAKER OUTPUT
CLASS 2 WIRING:
To 4-ohm/8-ohm
INPUT 1-4:
stereo speakers or
70-volt/100-volt
mono speakers
RELAY 1-4:
To NET:
controllable COM A and COM B: To Cresnet
devices To RS-232 devices devices
R
HDMI INPUTS 1-6: MC/LN 1-6: DM INPUTS: HDMI DM OUTPUTS:
From HDMI From balanced From DM 8G+ OUTPUTS: To DM 8G+
audio/video sources microphone/ output of DM input of DM
To HDMI
line level transmitter or displays receiver or
audio sources other DM other DM
device or from device or to
HDBaseT device 1 HDBaseT
device
COLOR PART NUMBER
Black 2033588
2014966
2012361
2003575
2003576
2003577
2003580
Black 2002389
2001134
Black 2007223
SERVICE:
For factory
use only
Ground
PoDM+
INPUT PWR: 100-240V~6.0A
From Crestron 50/60 Hz:
PoDM+ power From ac
supply 1 power outlet
L R L R L R
CONTENT CONTROL LAN:
LAN: SUBNET: 10BASE-T/
10BASE-T/ To Crestron 100BASE-TX/
100BASE-TX local 1000BASE-T
Ethernet to network Ethernet to
LAN for device LAN
1
AirMedia or
AUX OUT 1-2:
1 H.264 content
To video
input (optional)
2
teleconferencing
or codec input
PROG OUT:
Audio output to
ampli er or
ampli ed speakers