Table of Contents
Advertisement
Crestron C2N-DVP4DI
Operations Guide – DOC. 6112
Interface Menu – Slave Mode Selected – Cresnet ID 03
After interface parameters have been set, select the Save and Return button, located
at the bottom right corner of the INTERFACE MENU. This returns you to the
SYSTEM SETUP MENU.
Computer RS-232 Port Menu
Click RS-232 on the SYSTEM SETUP MENU. The RS-232 parameters for the
C2N-DVP4DI must be set for communicating with Viewport via an RS-232 port.
Options for baud rate, data bits, parity, stop bits, and handshaking are available from
COMPUTER RS-232 PORT MENU. Text within the selected button changes color
from black to red.
RS-232 settings for the C2N-DVP4DI (defaults):
•
Baud Rate: 115200 (use with newer .cuz files, version 3.0.17 and higher)
57600 (use with older .cuz files)
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
•
RTS/CTS: On
•
XON-XOFF: Off
Digital Video Processor
Digital Video Processor: C2N-DVP4DI • 17
Advertisement
Table of Contents
