Table of Contents
Advertisement
Digital Video Processor
20 • Digital Video Processor: C2N-DVP4DI
C2N-DVP4DI Output Settings Setup
From the MAIN MENU, select RGB and Video SETUP to open the setup
selections window.
Setup Selections
Click Select Input.
Input Selection Buttons
Each of the inputs is selected and adjusted from this menu. Click on an input and the
current settings (preset number, resolution, horizontal and vertical frequency) for the
selected input are displayed.
RGB/DVI Resolution and Sync Options
The Check Output button is used to adjust the display device (using grid test
patterns) to the C2N-DVP4DI output, and to set the C2N-DVP4DI output resolution.
The output of the C2N-DVP4DI should always match the native resolution of the
display device.
NOTE: Custom resolution is set-up in Viewport. Refer to page 23.
1
Select the Check Output button to open the RGB/DVI resolution and sync
options.
Check Output - RGB/DVI Resolution and Sync Options
Crestron C2N-DVP4DI
Operations Guide – DOC. 6112
Advertisement
Table of Contents
