Table of Contents
Advertisement
Digital Video Processor
30 • Digital Video Processor: C2N-DVP4DI
Video 1A Selected
The Overscan feature is only available for composite,
component, and S-video sources. OverScan is the active image
area in a video picture that is outside the edges of the display
device. Overscan first came about because of noise and other
artifacts at the beginning and end of the scan lines. To reliably
eliminate the noise and fill the screen with a picture, the outside
edge of the active picture area was pushed out past the edge of the display area. The
average or targeted overscan loss is about 5 to 10% of the image on each edge.
Digital images have nearly eliminated the noise and other artifacts at the edge of the
picture, so you can safely show more of the video image. Use the overscan selection
when sizing and positioning the video windows.
Presets
The C2N-DVP4DI allows you to save 32 presets. These are useful when you are
receiving multiple video sources from a remote location such as a matrix switcher.
You can assign specific properties (color adjustments, size, position, etc.) to each
preset. To recall presets, select the preset number and click Recall Selected Preset.
Presets
Crestron C2N-DVP4DI
Operations Guide – DOC. 6112
Advertisement
Table of Contents
