Table of Contents
Advertisement
Crestron C2N-DVP4DI
Operations Guide – DOC. 6112
Grid Test Pattern
Adjust position as desired.
RGB Color Adjustment
1. Select a color bar to display in the RGB window, and select Color. The
color buttons appear (refer to the following graphic).
NOTE: You may need to compare color bar and gray scale test patterns to
determine the correct adjustment.
RGB Color Buttons
2. Show Buttons control the translucency of the setup buttons. Show Buttons
is similar to the translucent object except that it is available only in the
Setup mode. The translucent object is only available in VT Pro-e projects as
a property feature (refer to "Translucent Objects" on page 33). Show
Buttons has three settings for displaying buttons in the setup mode: full on
(opaque), 50% translucent, and 100% translucent (invisible). The up and
down arrows steps through these selections.
3. The Video Window button resizes the current window so that you can see
the edges of the source and adjust the source to the edge of the display.
4. Adjust RGB color as desired.
5. Select a gray scale test pattern to display in RGB window, and check for
any color in gray patterns.
6. Adjust as desired, and then continue to the Lock Sync adjustment.
Digital Video Processor
Digital Video Processor: C2N-DVP4DI • 27
Advertisement
Table of Contents
