Table of Contents
Advertisement
Crestron C2N-DVP4DI
Operations Guide – DOC. 6112
RGB/DVI Output Customization
The output of the C2N-DVP4DI can be customized to match nearly any output
display device through Viewport commands. You must know all of the parameters
specified to achieve proper results. Any parameter not specified is inserted by the
nearest known standard in memory, which may not function properly with the
display device.
NOTE: Obtain the required parameters from the manufacturer of the display device.
There are 11 adjustable parameters in Viewport. Horizontal resolution is expressed
as pixels; vertical resolution is expressed as lines.
To display the current settings, type output at the C2N-DVP4DI prompt:
DVP4DI>output
To display a list of the standard available options, type
output ?
The format is "OUTPUT X" where "X" is one of the
C2N-DVP4DI standard horizontal resolutions or HDTV
resolutions. Available Standard Horizontal
Resolutions:
Available HDTV:
Resolution, Format is "OUTPUT 1 X"
To change the settings, type:
output<space>parameter number (1-11)<space>new setting
and press Enter
Example, selecting output 2 and changing the vertical resolution to 600:
DVP4DI>output 2 600
New Custom Output Resolution: 1024 x 600
Reboot to take effect.
NOTE: The output vertical resolution of the C2N-DVP4DI is from 60 Hz to 85 Hz
except for 1600 x 1200 where the maximum is 60 Hz.
NOTE: A warning message appears when changing vertical frequency on Viewport.
"You have Stretch turned ON in Setup/Options/On Screen to On Screen Effect. To
Enable Stretch, set all RGB Inputs to match DVP4 Output Refresh Rate."
NOTE: Type: output to display current settings.
Type: output ? to display the list of available standard options.
Digital Video Processor
800, 1024, 1152, 1280, 1365, or 1600.
720P. For a Custom Horizontal
Digital Video Processor: C2N-DVP4DI • 23
@ 60 Hz
Advertisement
Table of Contents
