Table of Contents
Advertisement
Digital Video Processor
38 • Digital Video Processor: C2N-DVP4DI
DVP4DI Reference Guide (Doc. 6177), available from the Crestron website
(www.crestron.com). for additional information.
2. From the Viewport, type Caltouch, and follow the instructions on the
output screen of the C2N-DVP4DI (This command is not required if using a
mouse).
NOTE: Take note of the output resolution of the C2N-DVP4DI. You will need this
when performing a calibration if the pointing device is not a mouse.
DVP4DI>touch ?
TOUCH [input]
where input =
0 - Program Control
1 - Microsoft mouse*
2 - Smart (SC3,SC4,SC5)
3 - Smart (SC6,SC7,..)
4 - Microtouch
5 - Dynapro SC3
6 - Dynapro SC4
7 - Elo Graphics
8 - Crestron Tablet
9 - Mouse Systems Mouse
10 - Logitech MouseMan
11 - Wacom Tablet
12 - QTC Touch Controller
No parameter - current input selection
NOTE: Additional pointing device installation instructions, including using
touchpanels, built-in Telestrator, and Sympodium, are in the latest version of the
C2N-DVP4DI Reference Guide (Doc. 6177), available from the Crestron website
(www.crestron.com).
Crestron C2N-DVP4DI
Operations Guide – DOC. 6112
Advertisement
Table of Contents
