Appendix: Factory Settings - Crestron C2N-DEMO-LIGHTING Reference Manual

Crestron C2N-DEMO Lighting Case

Appendix: Factory Settings

Reference Guide – DOC. 6282
The C2N-DEMO Lighting Case ships completely configured. In the event that the
original factory settings are altered, corrupted, or erased, the following information
is necessary for reconfiguring the processor in each case.
C2N-DEMO Interface Case:
•
IP address is 192.168.40.11
•
Subnet mask is 255.255.255.0
•
Default router is 192.168.40.10
C2N-DEMO Lighting Case:
LAN A
•
IP address is 192.168.1.2
•
Subnet mask is 255.255.255.0
•
Default router is 192.168.1.1
LAN B
•
IP address is 192.168.40.10
•
Subnet mask is 255.255.255.0
•
Default router is 0.0.0.0
The Network Address Translator (NAT) setting for the Ethernet card in the
processor is as follows:
Crestron Demonstration Case: C2N-DEMO Lighting Case • 17
Demonstration Case