Crestron BB-4000L Installation Manual
Crestron BB-4000L Installation Manual

Crestron BB-4000L Installation Manual

Wall mount back box

Advertisement

Quick Links

Crestron BB-4000L
Wall Mount Back Box
Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for Crestron BB-4000L

  • Page 1 Crestron BB-4000L Wall Mount Back Box Installation Guide...
  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
  • Page 3: Table Of Contents

    Crestron BB-4000L Contents Wall Mount Back Box: BB-4000L Description... 1 Installation ... 3 Assembly ... 3 Mounting ... 4 Other Mounting Option Accessories ... 5 Further Inquiries ... 6 Future Updates... 6 Return and Warranty Policies ... 7 Merchandise Returns / Repair Service ... 7 CRESTRON Limited Warranty...
  • Page 5: Wall Mount Back Box: Bb-4000L

    TPS-4000L series of wall mounted touchpanels. The table below lists all parts included with the BB-4000L. Supplied Components The mounted view of the BB-4000L is shown in the following diagram. BB-4000L Mounted View (Optional Cover Plate Attached) Installation Guide - DOC. 6305...
  • Page 6 Wall Mount Back Box The dimensions of the BB-4000L are shown below. Dimensional Drawing 2 • Wall Mount Back Box: BB-4000L 8.99 in (22.84 cm) 12.75 in (32.37 cm) Wall Mount Enclosure 8.99 in (22.84 cm) 12.63 in (32.08 cm) Mounting Plate 8.34 in...
  • Page 7: Installation

    (4 USED FOR FRONT MOUNTING PLATE) #08-8B SELF-TAPPING SCREW FOR GROUND PURPOSES WALL MOUNT ENCLOSURE QTY. 1 FRONT MOUNTING PLATE QTY. 1 ATTACH AFTER MOUNTING BRACKETS Wall Mount Back Box "L PAN HEAD SCREW Wall Mount Back Box: BB-4000L • 3...
  • Page 8: Mounting

    1. Position assembly to front edge of stud and align it as even and as flush as possible. 2. Use the level and verify that the back box is horizontal. Leveling must be done before proceeding. 3. Attach the assembly to the left or right side of the stud with standard drywall screws or nails (supplied by other).
  • Page 9: Other Mounting Option Accessories

    If too much of the cover plate is exposed after the drywall is cut, you may need to patch the area. Crestron provides the following accessories: The manuals for the MMK-4000L and TMK-4000L are available for review from the Downloads | Product Manuals section of the Crestron website (www.crestron.com). Installation Guide - DOC. 6305...
  • Page 10: Further Inquiries

    (www.crestron.com) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. As of the date of manufacture, the BB-4000L has been tested and found to comply with specifications for CE marking.
  • Page 11: Return And Warranty Policies

    Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
  • Page 12 Crestron Electronics, Inc. Installation Guide – DOC. 6305 15 Volvo Drive Rockleigh, NJ 07647 10.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

Table of Contents