Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron BB-5000
Summary of Contents for Crestron BB-5000
- Page 1 Crestron BB-5000 Back Box Installation Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON...
-
Page 3: Table Of Contents
Crestron BB-5000 Contents Back Box: BB-5000 Description... 1 Installation ... 2 Construction Method ... 2 Post-Construction Method... 4 Further Inquiries ... 6 Future Updates... 7 Cutout Detail of Supplied Template ... 8 Return and Warranty Policies ... 9 Merchandise Returns / Repair Service ... 9 CRESTRON Limited Warranty... -
Page 5: Back Box: Bb-5000
Screw, 6-32 x 1"L, pan, phillips, black Screw, 6-32 x 1/2"L, pan, phillips, zinc Template Three views and dimensions for the metal pieces of the BB-5000 are shown below. BB-5000 Physical Views and Dimensions Installation Guide - DOC. 5827A DESCRIPTION... -
Page 6: Installation
Back Box Installation There are at least two different methods of installing the BB-5000. The construction method is initiated during the construction process. Use this method to wall mount either a Crestron Series 4500 or Series 5000 Lectern/Wall Mount Touchpanel to a wall stud. - Page 7 11. Position one metal mounting plate along the bottom horizontal edge so that it covers the two center holes marked “A”. 12. Use two pan head screws (1” length), supplied, to loosely secure the bracket and plate to the mounting surface. Back Box Back Box: BB-5000 • 3...
-
Page 8: Post-Construction Method
2 with a torque of 11 in-lbs (1.243 N*m). 15. If touchpanel is available, secure touchpanel to BB-5000 using eight pan head screws (1” length), supplied. Tighten screws by hand being careful not to crack gypsum board. - Page 9 Crestron BB-5000 Securing Bracket/Plate Assembly to Top and Bottom Edges of Opening NOTE: Do not slide the back box too far into the opening or it may fall in between the gypsum board (e.g., if installation is into an exterior wall).
-
Page 10: Further Inquiries
Back Box Securing Back Box to Bracket/Plate Assembly Further Inquiries If after reviewing this Installation Guide for the BB-5000, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: 6 • Back Box: BB-5000 14. -
Page 11: Future Updates
Crestron BB-5000 Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the BB-5000, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. -
Page 12: Cutout Detail Of Supplied Template
Back Box Cutout Detail of Supplied Template Use the alphanumeric codes in the illustration and tables to obtain the cutout dimensions for the BB-5000. However, Crestron recommends that the supplied template be used to avoid error. V1 V2 HORIZONTAL MEASUREMENTS 8 •... -
Page 13: Return And Warranty Policies
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 14 Back Box Crestron BB-5000 This page intentionally left blank. 10 • Back Box: BB-5000 Installation Guide - DOC. 5827A...
- Page 15 Crestron BB-5000 Back Box This page intentionally left blank. Back Box: BB-5000 • 11 Installation Guide - DOC. 5827A...
- Page 16 Crestron Electronics, Inc. Installation Guide – DOC. 5827A 15 Volvo Drive Rockleigh, NJ 07647 05.02 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.