Table of Contents
Advertisement
LDC450B Large Diameter Cleaver
Chapter 10 Specifications
LDC450B
Cleave Type
Accepted Fiber Sizes
Accepted Fiber Types
Cleave Method
Cleave Tolerance
Loading
Tension
Scribe
V-Groove Inserts
Power
External Power Supply
Dimension (L x W x H)
without Holding Blocks
Dimensions (L x W x H)
Weight
Operating Temperature
Altitude Range
Operating Humidity
Storage Temperature
Storage Humidity
Battery Life
8
These Cleavers are calibrated using standard weights, so the tension settings are programmed into the Handset Controller in grams. This
maximum tension corresponds to 6.5 kg.
Page 48
Cladding: Ø200 µm to Ø800 μm
Buffer: Ø250 µm to Ø3.2 mm
SM, PM, MM, Specialty Fibers Including
Photonic Crystal Fiber (PCF) and Non-Circular Fiber,
Capillary Tubes
Tension and Scribe
±0.5° for 400 μm or Less Cladding Diameter
±1.0° for Greater Than 400 μm Cladding Diameter
Linear Tension, Stepper Motor Controlled
63.7 N (14.3 lbs) Max, Programmable
Diamond Blade, Stepper Motor Controlled
Available Separately (see previous chapter)
12.5 VDC, 5 A (Provided by External Power Supply)
100 - 120 / 200 - 240 VAC, 4.5 / 2.2 A, 47 - 63 Hz
10.63" x 4.64" x 2.91"
(269.9 mm x 117.7 mm x 73.8 mm)
10.63" x 4.64" x 4.48"
(269.9 mm x 117.7 mm x 113.7 mm)
5.5 lbs (2.5 kg)
0 to 2000 m Above Sea Level
0 to 75% Relative Humidity (Non-Condensing)
0 to 90% Relative Humidity (Non-Condensing)
5.5 hours with Handset Controller Plugged in, 10 hours with
Handset Controller Unplugged
Chapter 10: Specifications
Flat Cleave
15 to 40 °C
-20 to 60 °C
TTN197399-D02
8
Advertisement
Table of Contents
Need help?
Do you have a question about the vytran LDC450B and is the answer not in the manual?
Questions and answers