Freescale Semiconductor PE Micro Cyclone Pro User Manual page 70

CYCLONE PRO
The "Attempting to contact target and pass security" window appears.
64
device, please see Section 8.4 - HCS08 P&E Multilink/Cyclone
PRO Connectionssection 7.4. For more information using a Cyclone
Pro in Codewarrior with an HC(S)12 device, please see the
Codewarrior User's manual.
6. After you have configured the Cyclone Pro properly, click the "Contact
Target with These Setting" button.
7. Select the appropriate class in Target Hardware Type (Class VII for
MON08 MULTILINK and Class VIII for Cyclone PRO).
8. Click Contact target with these settings...
9. Follow the Power Cycle dialog instructions.
10. Click Yes in Confirm window. (Figure 8-6)
11. Click Yes in Erase and Program FLASH window. (Figure 8-7)
12. Follow the subsequent Power Cycle dialog instructions as the
scripted procedure automatically establishes communications, erases
the FLASH if necessary, and programs the FLASH.
Figure 8-6: Confirm Window
Figure 8-7: Erase And Program Flash Window
Cyclone PRO User Manual